Influence of Input Hardware and Work Surface Angle on Upper Limb Posture in a Hybrid Computer Workstation
研究了混合工作站中工作台面角度和输入硬件对上肢姿势的影响，发现水平台面配电脑适合打字，倾斜台面配平板适合间歇阅读，有助于办公室员工交替姿势。
OBJECTIVE: We evaluated the effect of work surface angle and input hardware on upper-limb posture when using a hybrid computer workstation. BACKGROUND: Offices use sit-stand and/or tablet workstations to increase worker mobility. These workstations may have negative effects on upper-limb joints by increasing time spent in non-neutral postures, but a hybrid standing workstation may improve working postures. METHOD: Fourteen participants completed office tasks in four workstation configurations: a horizontal or sloped 15° working surface with computer or tablet hardware. Three-dimensional right upper-limb postures were recorded during three tasks: reading, form filling, and writing e-mails. Amplitude probability distribution functions determined the median and range of upper-limb postures. RESULTS: The sloped-surface tablet workstation decreased wrist ulnar deviation by 5° when compared to the horizontal-surface computer when reading. When using computer input devices (keyboard and mouse), the shoulder, elbow, and wrist were closest to neutral joint postures when working on a horizontal work surface. The elbow was 23° and 15° more extended, whereas the wrist was 6° less ulnar deviated, when reading compared to typing forms or e-mails. CONCLUSION: We recommend that the horizontal-surface computer configuration be used for typing and the sloped-surface tablet configuration be used for intermittent reading tasks in this hybrid workstation. APPLICATION: Offices with mobile employees could use this workstation for alternating their upper-extremity postures; however, other aspects of the device need further investigation.