Optimising production, maintenance, and quality control for imperfect manufacturing systems considering timely replenishment
针对不完美制造系统，考虑缓冲库存的及时补货，建立模型同时优化生产周期、维护频率、质量检验周期和检验次数，以最小化单位期望成本。
To optimise production planning, maintenance strategies, and quality control in imperfect manufacturing systems, most existing works set the buffer stocking time at the cycle start time. However, excess inventory holding costs will be incurred if the buffer is stocked too early. This means that while the abovementioned setting can make the optimisation model simple, it might increase costs. Taking the uncertain practical buffer stocking time of an imperfect manufacturing system into account, this study aimed to find the production cycle, maintenance frequency, quality inspection cycle, and number of inspections that will minimise the expectation unit cost of the system. To this end, we developed a new model to optimise production, maintenance, and quality control considering timely replenishment. First, excess inventory holding and shortage costs were considered and the production process was divided into five scenarios based on the buffer stocking time and inspection time for assignable causes. Second, the link between production, maintenance, and quality was addressed by capturing the dynamic and random behaviour of production systems. An x-bar control chart was integrated into the model to monitor quality. A case study and sensitivity analysis were undertaken to verify the effectiveness and superiority of the proposed optimisation strategy.